弹道导弹被动段最优脉冲变轨方法

弹道导弹大气层外飞行时间长且弹道固定,易被敌方预测和拦截。针对以上问题,本文提出一种最优脉冲式变轨方法,该方法设计的弹道由2条不同的椭圆弧段组成,成功命中目标的同时,增加了敌方的拦截难度。以机动变轨所需能量和变轨后飞行剩余时间的加权最优为性能指标,设计了利用遗传算法在初始弹道上寻求最优变轨点的方法。最后,将遗传算法搜索最优点结果与遍历搜索结果进行对比,其最大误差为 ,从而验证了遗传算法在应用于导弹变轨问题,用以寻求最优变轨点是准确有效的。     

翼伞精确空投系统归航轨迹规划与控制

翼伞归航轨迹规划与控制问题是翼伞系统在一定初始状态下,利用自身可操作性,完成从初始位置到目标位置的转移问题。针对翼伞空投系统不同归航要求,规划出满足精度要求为圆径概率误差（ CEP ）小于40m的归航轨迹并经过一定量的控制完成翼伞空投系统精确空投任务。首先建立翼伞系统状态空间六自由度模型,并在此基础上提出系统简化稳态模型,通过最优控制方法,规划出满足空投要求的最优归航轨迹后对翼伞进行不断控制直至目标点。最后通过Matlab仿真试验,绘出翼伞系统归航轨迹图与控制变化图。     

Optimal control of an M/G/1 queue with impatient priority customers

An optimal operating policy is characterized for the infinite‐horizon average‐cost case of a single server queueing control problem. The server may be turned on at arrival epochs or off at departure epochs. Two classes of customers, each of them arriving according to an independent Poisson processes, are considered. An arriving 1‐customer enters the system if the server is turned on upon his arrival, or if the server is on and idle. In the former case, the 1‐customer is selected for service ahead of those customers waiting in the system; otherwise he leaves the system immediately. 2‐Customers remain in the system until they complete their service requirements. Under a linear cost structure, this paper shows that a stationary optimal policy exists such that either (1) leaves the server on at all times, or (2) turns the server off when the system is empty. In the latter case, we show that the stationary optimal policy is a threshold strategy, this feature being commonplace in most of priority queueing systems and inventory models. However, the optimal policy in our model is determined by two thresholds instead of one. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 201–209, 2001     

Optimal material control in an assembly system with component commonality

Allocation of scarce common components to finished product orders is central to the performance of assembly systems. Analysis of these systems is complex, however, when the product master schedule is subject to uncertainty. In this paper, we analyze the cost—service performance of a component inventory system with correlated finished product demands, where component allocation is based on a fair shares method. Such issuing policies are used commonly in practice. We quantify the impact of component stocking policies on finished product delays due to component shortages and on product order completion rates. These results are used to determine optimal base stock levels for components, subject to constraints on finished product service (order completion rates). Our methodology can help managers of assembly systems to (1) understand the impact of their inventory management decisions on customer service, (2) achieve cost reductions by optimizing their inventory investments, and (3) evaluate supplier performance and negotiate contracts by quantifying the effect of delivery lead times on costs and customer service. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:409–429, 2001     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

火力运用对策空间模型

根据空 -地作战的特点 ,提出了软、硬火力单位的概念 ,根据模型提出了作战指数、生存指数 ,为双方的实力与“保卫目标”的安全度分析提供了数量依据 ;根据微分对策和战术原则提出了规范作战模式等概念 ,为构造火力运用、兵力数量需求等算法搭起一个框架。     

基于测高精度最优值的星载分布式InSAR编队构形设计方法

编队构形设计是分布式干涉SAR系统总体设计的关键问题,它必须紧密结合系统性能评价和编队运动规律进行。针对星载分布式干涉SAR的双站、斜视、空间基线等特点,以主星带辅星群分布式InSAR为例,建立干涉测高精度与基线矢量的关系;以直角坐标过渡,建立基线矢量与卫星间轨道根数差的关系,从而建立了测高精度与卫星轨道根数差的关系;以雷达工作的中间时刻达到测高精度最优值为设计准则,得到双星和多星编队设计方法;仿真分析表明根据上述设计方法得到的优化编队构形,其测高性能要优于干涉车轮和干涉钟摆编队。     

武警部队快速机动中最优路径的实现

紧急条件下武警部队快速机动最优路径，是一个多目标多约束随机动态交通网络寻优问题。在分析交通网络拓扑化特点及最短路模型前提下，着重研究道路通行能力带给复杂公路网络道路寻优问题的影响，并结合GIS系统利用改进的Dijkstra算法求解。     

More on the search for an infiltrator

We have asymptotically solved a discrete search game on an array of n ordered cells with two players: infiltrator (hider) and searcher, when the probability of survival approaches 1. The infiltrator wishes to reach the last cell in finite time, and the searcher has to defend that cell. When the players occupy the same cell, the searcher captures the infiltrator with probability 1 ? z. The payoff to the hider is the probability that the hider reaches the last cell without getting captured. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 1–14, 2002; DOI 10.1002/nav.1047     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024